You’re offline. This is a read only version of the page.
| ID : | PL-171003195802 |
| Brand : | Miyano |
| Model : | ABX-64TH2 |
| Year Of Manufacture : | 2012 |
| Description : | MIYANO MODEL ABX-64TH2 10-AXIS CNC SUPER CNC TURNING CENTER W/ (3) TURRETS, (2) SPINDLES, (2) Y-AXIS SLIDES, & (36) REVOLVING TOOL STATIONS |
MIYANO MODEL ABX-64TH2 10-AXIS CNC SUPER CNC TURNING CENTER W/ (3) TURRETS, (2) SPINDLES, (2) Y-AXIS SLIDES, & (36) REVOLVING TOOL STATIONS
Control: Fanuc 16i-TB
Technical Specifications (Subject to Verification) More detail available on request.
BAR WORK
Round collet capacity left and right spindles 2.5”
CHUCK WORK
Chuck size (left spindle) 6”
(right spindle) 6”
WORK LENGTH
Maximum turning length left and right spindles 5”
MACHINING CAPACITY
Maximum turning diameter (left spindle) 6.65”
(right spindle) 6.65”
Maximum turning length 5.0”
Swing diameter of turret
Upper left 20.8”
Upper right 20.8”
Lower 20.8”
LEFT SPINDLE
Collet capacity 2.5”
Spindle speed range (infinitely variable) 40 to 4,000 RPM
Variable speed steps Direct drive
Spindle drive motor (30 minute rating) AC 20 HP
Motor Type AC type
Spindle nose A2-6
RIGHT SPINDLE
Collet capacity 2.0”
Spindle speed range (infinitely variable) 50 To 5000 RPM
Spindle drive motor (variable speed) maximum rating AC 10 HP
Spindle nose A2-6
Slide movement (Z3-axis) NC Control
Slide stroke (Z3-axis) 25.59”
Rapid traverse rate (Z3-axis) 1181 IPM
Thrust force (Z3-axis) 1,022 Lbs.
Type of slide Linear Guide
UPPER TURRET LEFT
Number of tool stations 12
Slant bed 45 Degrees
Maximum slide stroke (X1-axis) 7.48”
(Z1-axis) 1.81”
(Y1-axis) +/-1.57”
Rapid traverse rate (X1-axis) 630 IPM
(Z1-axis) 787 IPM
(Y1-axis) 472 IPM
Turret indexing time 0.25 Sec/pos
Turret indexing type Bi-directional
Thrust force (X1, Z1, Y1) (1,700Lbs., 1,278Lbs., 1,700Lbs.) Slide type Box way
UPPER TURRET RIGHT
Number of tool stations 12
Slant bed 45 Degrees
Maximum slide stroke (X3-axis) 7.48”
(Z3-axis) 25.59”
(Y3-axis) +/-1.57”
Rapid traverse rate (X3-axis) 630 IPM
(Z3-axis) 1181 IPM
(Y3-axis) 472 IPM
Turret indexing time 0.25 Sec/pos
Turret indexing type Bi-directional
Thrust force (X3, Z3, Y3) (1,700Lbs., 1,022Lbs., 1,700Lbs.) Slide type Box way
LOWER TURRET
Number of tool stations 12
Slant bed 45 degrees
Maximum slide stroke (X2-axis) 7.48”
(Z2-axis) 19.6”
Rapid traverse rate (X2-axis) 630 IPM
(Z2-axis) 787 IPM
Turret indexing time 0.250 Sec/pos
Turret indexing type Bi-directional
Thrust force (X2, Z2) (1,700Lbs., 1,278Lbs.)
Slide type Box way
PARTS CATCHER
Maximum part diameter 2.0”
Maximum part length 5.0”
REVOLVING TOOL ATTACHMENT TURRETS
Number of positions (upper left & upper right & lower turret) 36
Drive motor maximum rating (upper turret) AC 3.4 HP
Speed range (infinitely variable) 40 to 4000 RPM Revolving tool axis X and Z
Maximum drill diameter capacity (1/2”)
Maximum tapping capacity (5/16”-18 UN)
C-AXIS SPINDLE CONTROL (LEFT & RIGHT)
Spindle positioning 360
Degrees Minimum command increment 0.001 Degree Positioning system C-axis control built in motor
Simultaneous 2-axis movement (X-C) or (Z-C)
C-axis repeatability +-0.017 Degree
C-axis positioning accuracy +/- 0.2 Degree
Rapid feed rate 33 RPM
GENERAL SPECIFICATIONS
Power required 60 KVA
Voltage required 220 Volts + 5% -10%@60HZ Amperage required 175 Amp
Compressed air required 80 PSI
Lubrication tank capacity (1 gallon)
Hydraulic tank capacity (2.6 gallon)
Coolant tank capacity (52.8 gallon)
MACHINE DIMENSIONS
Width 84.1”
Height 77.2”
Length 131.3”
Length (including goose neck chip conveyor) 159.7”
Machine weight 21,164 Lbs.
STANDARD FEATURES
No Similar Products found for this product
