You’re offline. This is a read only version of the page.
| ID : | PL-180619173856 |
| Brand : | DMG |
| Model : | CTX-310 |
| Year Of Manufacture : | 2008 |
| Description : | DMG Gildemeister CNC Lathe, Y-axis, Sub-Spindle, Live milling, C-axis Model CTX-310 Year :2008 |
| Request Quote | |
DMG Gildemeister CNC Lathe, Y-axis, Sub-Spindle, Live milling, C-axis
Model CTX-310
Year :2008
Machine location: Toronto ON
Technical Specifications (Subject to verification)
Capacity
Max swing over bed : 500 mm (19.6 in)
Swing over cross slide : 375 mm (14.75 in)
Bar capacity : 50.8 mm (2 in)
Clamping chuck diameter : 170/210 mm (6.69/8.2 in)
Clamping chuck diameter backspindle : 165 mm (6.49 in)
Transverse stroke : 202 mm (7.9 in)
Longitudinal stroke : 450 mm (17.7 in)
Y-axis stroke : +/-40 mm (1.57 in)
Feed drive
Rapid traverse X/Z axes : 24/30 m/min (787/1181 ipm)
Rapid traverse Z2/Y axis : 30/10 m/min 1181/394 ipm
Headstock (left/right)
Spindle nose (plain flange) : 140 h5/145h5mm
Inside diameter front bearing : 100/90 mm 3.93/3.54 in
Spindle bore diameter : 69/44 mm 2.69/1.73 in
Main drive
Rating AC main drive (100% ED) : 16 kW 21.4 HP
Torque (100% ED) : 153 Nm 114 lb.ft.
Speed range : 20 - 6000 rpm
Backspindle
AC drive power (100% ED) : 7.5 kW 10 HP
Torque (100% ED) : 48 Nm 35.3 lb.ft.
Speed range : 20 - 6000 rpm
Tool turret
Number of tool stations 12
Tool reception according to DIN 69880 (VDI 3425)
cylinder shaft diameter 30 mm 1.181 in
Indexing time 30° 0, 2 sec.
Tool turret Heidenhain controls
Number of driven tools 12
Drive power (40% ED) 9 KW 12 HP
Torque (40%) 20 Nm 14.8 ft lb
Max speed. 4500 min-1
C-axes, main spindle / backspindle
Speed range 0 - 200 min-1
Accuracy at point stopping < 0, 04 degrees
Electrical connection
Installed power, max ca. 24 kVA
Voltage 400 V
Frequency 50 Hz
Net weight of the machine with chip conveyor approx. 4500 kg 9920 lbs.
Dimensions Machine with chip conveyor LxBxH ca. 4000 x 1563 x 1730 mm
ca. 157 x 61.5 x 68.11 inch
Equipped with
