Hardinge Conquest H-51 Super-Precision CNC Turning Center View full category

Hardinge Conquest H-51 Super-Precision CNC Turning Center

Year New

Model Conquest H-51 MSY

Control Mitsubishi M720V

Technical Specifications (Subject to verification)

Maximum Swing over Way Covers 27.87" (708mm)

Work Capacities

Chuck Size (Chuck Not Included) 8” (200mm)

Maximum Bar Capacity 2" (51mm)

Maximum Machining Diameter (BMT-55) 12.34" (313.7mm)

Maximum Machining Diameter (BMT-45) 10.600” (269.2mm)

Maximum Machining Diameter (T Style) 15.040” (382mm)

Spindle

Maximum Speed SP: 5,000rpm

Maximum Power Rating (30 mins) 20-hp (15 kW)

Spindle Nose A2-6 / 20 C

Spindle Orient 1.0 degree

Collet/Chuck Actuator Type Hydraulic

Travels and Feedrates

Maximum X-Axis Travel 7.75" (196mm)

Maximum Z-Axis Travel 28.15" (715mm)

Maximum Y-Axis Travel +2.56 to -1.0” (65mm to -25.4mm)

Continuous Z-Axis Thrust 1,691 lbs. (7,540N)

X-Axis Rapid Traverse Rates 1,100-ipm (28m/min)

Z-Axis Rapid Traverse Rates 1,500-ipm (38m/min)

Y-Axis Rapid Traverse Rates 236-ipm (6.0m/min)

BMT-55 Live Tooling Top Plate

BMT-55 bi-directional 12-station + ½ station index

Square Shank 1" (25mm)

Round Shank Tooling 1.50" (38mm)

Index Time (rotation/including clamp-unclamp) 0.40/1.45 Seconds

Tool Shank Diameter w/ER 25 Collets .04 - .625" (1mm - 16mm)

Live Tooling Power Rating (30 Min Rating) 7.5HP (5.5 kW)

Live Tooling Torque Rating (30 Min Rating) 24.3 ft-lb (34 Nm)

Live Tooling Max Speed 8,000-rpm

Sub Spindle

Maximum Speed 6,000-rpm

Maximum Power Rating (30 min) 10-hp (7.5 kW)

Spindle Nose A2-5/16C

Chuck Size (Chuck Not Included) 6" (150mm)

Spindle Bore (not bar capacity) 1.89" (48mm)

Spindle Orient (optional) 1.0 degree

Collet/Chuck Actuator Type Pneumatic

Maximum Travel 28.275" (718mm)

Power Requirements: 230 volts, 3 phase 50-60 Hz, 44.9 kVA

Miscellaneous

Machine Lubrication Centralized Grease

Machine Communication RS-232-C, Embedded Ethernet/PCMCIA

Machine Length 120" (3048mm)

Machine Depth 103" (2616mm)

Machine Height 84.7" (2151mm)

Approx. Machine Weight 13,500 lb. (6123kg)

Air Requirement 70 - 90 psi (4.8-6.2 bar)

Configurations for H-51 SP MSY:

Includes: BMT-55 live tool top plate, Y axis, 20C collet ready main spindle, 16C collet ready sub spindle, C-axis on both main and sub spindles, 60 psi through tool coolant, X axis linear scale, barfeed interface, chip conveyor interface, hydraulic collet closer, 3-position stack light, NAVI LATHE programming (NAVI LATHE support - 2-axis turning only), .00001” (.0001mm) control resolution

• PART CATCHER, H SERIES
• SPING EJECTOR, 16C
• TANK, COOLANT SIDE CONVEY 60 HZ
• ENGLISH TAG KIT
• COOLANT CHILLER, 230 VOLT (FANUC & MITSUBISHI)
• COOLANT FLUSH, MAIN HEADWALL
• AIR BLAST, MAIN SPINDLE
• COOLANT FLUSH SUB SPINDLE
• AIR BLAST, SUB SPINDLE
• PART DETECTOR, H-SERIES
• CONVEYOR, SIDE H51
• SPECIAL A2-5 TO 16C ADAPTER BODY
• A25-16C-4.5” LINK-UP FOR 16C SUB SPINDLE